110V 3000W Electric Grinder Wet & Dry Feed / Flour Mill Cereals Grain Corn Wheat

Description

Description:
This machine is suitable for grinding bean curd, starch, rice flour, corn and used in other food industries.
It can grind wheat, rice, corn, sorghum, soybeans and other crops into dry powder.
Especially, it is also suitable to grind soaked soybeans and rice into pulp,can make soybean milk,rice cake and other foods. At the same time, it can be used for crushing feed.
Capacitor shell is made of iron galvanized material, the transport process will not be crushed, put an end to rust. Heritage of traditional mill, innovative steel mill technology. All-round fine crushing, open the door of health.
Specification:
Supporting power: 3000W
Rated voltage: 110V
Rated speed: 1400r / min
Drill diameter: 150mm
Direction of rotation: counterclockwise
Milling details:
Corn ≥ 60kg / h
Rice ≥ 75kg / h
Wheat ≥ 75kg / h
Paddy rice ≥50kg / h
Refining:
Soybeans ≥ 50kg / h
Rice ≥ 50kg / h
Package Included:
1 x 110V Grinder Machine
1 x Funnel
1 x Manual
Note:
After getting the machine, The machine runs empty first, listen for the sound of the machine head. If there is no sound, it means that the two grinding discs have not been in contact.
First, the thickness adjustment lever needs to be adjusted slowly in a thin direction. Then the two grinding blades will slowly approach, when you listen the slight friction sounds, the two grinding blades just touch. At this time, the grinding piece is the closest distance and can no longer be adjust to the thin direction again.
When adjusting, you can't adjust too much in a thin direction If it is too tight, the two abrasive discs will rub against each other and the resistance will increase. The motor will be difficult to drive, and the temperature of the motor will rise, which can easily cause the motor to smoke and burn the machine.