2016 EZM328(GM328R)transistor tester/ ESR / frequency meter / square wave genera

Description

2016 EZM328(GM328R)transistor tester/ ESR / frequency meter / square wave genera
Features:
Add function :
Rotary coding switch
Rotating menu
Frequency meter interface
Precision reference source.
I. Overview
1 using the 2016 version of the latest V1.12K software, using M328 chip,, more features, in addition to the basic functions, as well as extensions.
2 micro-controller uses 8MHz external crystal, the measurement accuracy is better.
3 affect the accuracy of the relevant resistance using a thousandth of a metal film resistors, and the remaining one percent is also used metal film resistors.
4.LCD using 12864 LCD screen that can display measured data and graphics.
5 main chip dual in-line and with a socket, ideal for electronics enthusiasts upgrade or replace the chip.
6 uses 9V laminated battery.
7 All components are made ??of high quality genuine. LCD screen for low power backlit screen, the backlight current of about 2mA, so after boot time has backlighting for easy use in the dark.
8 Dimensions: 72 (W) X 85 (high) X22 (depth) mm.
9 Weight: about100grams.
The Working Current: 9V voltage, stable operating current of about 20mA.
A, the basic function
1 one-button operation, automatic shutdown.
2 shutdown current is only about 20nA.
3.Adopt 8MH crystal.
4 can automatically detect NPN, PNP bipolar transistors, N-channel and P-channel MOS FET, JFET, diodes, dual diode, thyristor small power unidirectional and bidirectional thyristor.
5 automatic identification pin arrangement of components.
Current amplification factor and base 6 measuring bipolar transistor - emitter threshold voltage.
7 can be extremely via the base - emitter threshold voltage and high-current amplification factor identification Darlington transistors.
8 protection diodes can detect bipolar transistors and MOS transistors.
9 measuring MOS FET gate threshold voltage and gate capacitance.
10. can simultaneously measure two resistors and resistor symbol is displayed. 4-digit display with decimal value 11 on the right. Resistance symbol is displayed on both sides of the pin number. So you can measure the potentiometer. If the potentiometer wiper position will not be transferred to a certain extreme, we can distinguish between the middle and both ends of the pins.
11 resistance measurement resolution is 0.1 ohms, 50M ohms can be measured.
12 can measure capacitance. Capacitor symbol is displayed on the right display values ??can be displayed with a decimal four values. Can measure the capacitance of 30pF-100mF resolution 1pF.
13.2uF more capacitors can measure the value of the equivalent series resistance ESR. The two values ??can be displayed with a decimal, resolution 0.01 ohms.
Two diodes 14 can be displayed in the correct order and a diode symbol, and gives the diode forward voltage.
15.LED is detected as a diode, a higher forward voltage. Combo of the LED is recognized as two diodes.
16. reverse breakdown voltage is less than 4.5V zener diode can be identified.
17 can measure a single diode reverse capacitance. If the connection base and collector of the bipolar transistor or the emitter of a pin, or the reverse can be measured or the collector junction capacitance of the emitter junction.
18 with a single measurement can get connections rectifier bridge.
19 Although the measurement limit capacitance of 25pF, but you can be measured by the measured capacitance with a known volume of at least 25pF capacitor in parallel, then the measure will result in parallel capacitance obtained by subtracting
B. extensions (via menu selection, and the user may want to add a few components, suitable for DIY)
1 can measure 1Hz-2MHz frequency. Above 25kHz resolution of 1Hz, the low-frequency measurements using the cycle, the resolution can go to 0.001MmHz.
2 can measure DC voltages below 50V.
3 can produce a square wave signal of 1Hz-2MHz.
4 can generate a fixed frequency pulse width but variable pulse wave, short key width by 1% increments, the longer the key width by 10% increments.
5. Can be activated by the individual capacitance and ESR menu functions, ranges 2UuF-50mF, since the amplitude of the measured signal is only 300mV, it is possible to measure the road. (Translation: due to non-4-wire measurement, the measurement lead resistance may lead to large errors, particularly small ESR measurements).
6 by adding a rotary coding switch, convenient menu item selection.
Package Included:
1x DIY KITS
EZM328(GM328R)transistor tester/ ESR table / LCR / frequency meter / square wave genera
1X CABLE
3XClip
Shipping
Feedback
Contact us
Return Policy
Shipping
Domestic
We believe you need to get your purchases as quick as possible. As a general rule your item will be shipped within 24 hours of you purchasing it. We pack and post from Tuesday to Sunday (Mondays we are closed) but definitely get all our mail off to the post office first thing Monday morning for you. Mail gets picked up at 12pm so chances are if you buy before lunchtime your item will leave the same day.
International
Same as above but understand that depending on what part of the world you are from it does take a little longer to send, delivery can be from 7-15 working days. Also other factors to take into consideration are quarantine and customs regulations in your country. It is also a consideration that customs duties and GST/VAT may be payable at the buyers expense.
Combined Postage (for items with shipping charges):
We are more than happy to combine postage, just use the Buy it Now function in eBay (but DO NOT PAY after purchasing each item) to buy all the products you need, when you have finished request a combined invoice, we will base the shipping cost on the size, weight and your location.
Feedback
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "
Delivery on time
" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the "
Ask the seller a question
" link on eBay.
Your Satisfaction is our Priority. Our goal is to make all our customers as happy as possible while shopping with us.
Contact us
For anything problem about product, price, shipping or order status, pleasecontact us via eBay message.Just contact us using the "
Ask the seller a question
" link on eBay.
We expect positive feedback and 5 scores DSR  from you.
Return Policy
We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
Please include your eBay ID and item number with any email requests.