-40%
2PCS Grinding Sheets for 3000W 110V Electric Grain Mill Grinder Machine
$ 21.64
- Description
- Size Guide
Description
2PCS Grinding Sheets for 3000W 110V Electric Grain Mill Heavy Duty Commercial Grain Grinder MachineDescription
About this item
★ 2PCS Model 150 grinder sheets for NAIZEA 3000W Electric Mill Grinder (B088FGBHDC & B087Q69H49).
★ Size of NAIZEA Grinding Sheets: 147mm outer diameter/ 77mm inside diameter/ 8mm thickness/ 98mm center distance.
★ Model 150 grinder sheets also can be used for other Commercial Electric Feed Mill Dry Wet Grinder, please measure dimension before ordering;
★ Perfect After-sales Service: We will challenge ourselves with excellent product quality, perfect after-sales service, and good commercial reputation to meet customers' satisfaction. 100% Refund Guarantee, please be assured the purchase. If you have any questions, please feel free to contact us.
★ THIS IS USED FOR DRY GRINDING.
Easy to Install:
1. Open the front cover of the machine, remove the grinding disc, and then loosen the screws that fix the grinding sheets and take out.
2. Reinstall the new grinding sheets back to the original grinding sheets position and lock the screws, but DO NOT lock them first. First, observe the gap between the inner circle of the grinding sheets and the mounting step, and adjust the gap to ensure uniformity. Concentric with the motor shaft. Then tighten the screws.
How to Adjust:
1. Put the moving grinding disc back into the grinding chamber, adjust the screw, turn it counterclockwise, then cover the front cover and lock it.
2. Start the motor and tighten the adjusting screw clockwise until the grinding piece rubs a sharp sound. Turn off the switch after the motor idles for two minutes.
3. Open the front cover, take out the grinding disc, observe the friction marks of the moving grinding piece and the static grinding piece tooth groove, and touch the grinding piece around the hand. If the friction marks on the grinding piece are evenly distributed, and the heat difference of the grinding piece is not obvious. This means that the grinding plate is installed in balance and can be used directly without adjustment.
Note:
1.Do not use too much force, the three screws should be evenly applied and gradually locked.
2.We are always committed to providing the best products and services. Please feel free to contact us if you have any questions.
3. Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.