Ashly SRA Series SRA-4150 4-Channel Power Amplifier

Description

WHAT IS FOR SALE (MAKE & MODEL)
:
Selling this pre-owned
Ashly SRA Series SRA-4150 4-Channel Power Amplifier
. (
With original operation manual
)
SHORT DESCRIPTION
:
The SRA Series SRA-4150 is a 4-channel convection-cooled rackmount P.A. or studio power amplifier.
CONDITION
:
This pre-owned amplifier is in very good condition (See enclosed photos). This professional equipment was moderately utilized in a corporate conference room setting (indoors) and “not” exposed to the elements. The unit works perfectly and is in very good condition..
RETAIL VALUE
:
To buy the
SRA-4150
brand new, it would be priced at around 0 +/- (See photo of online product search as an example).
PRICE
:
Motivated to sell with a buy-it-now price of 5.
SRA-4150 HIGHLIGHTS
:
Housed in a rugged 1-RU metal chassis
Designed to drive 4 and 8 Ohms loads.
An output of 80 W per channel at 8 Ohms and/or 140 W per channel at 4 Ohms.
Switch-mode-power supply
Class-D amplifier circuitry
Low-noise
Switchable HPF filter
Selectable gain sensitivity
Turn-on delay DIP switches with up to 8 seconds of delay available
Dual or bridged modes of operation
Internally switchable 120V/240V power supply
Extensive protection circuitry
Standard Euro-block inputs along with screw terminal outputs.
1-RU 10 pounds lightweight rackmount 4-channel power amplifier with 80 Watts per channel power output at 8 Ohms
Selectable Dual or Bridge Mono Operation, designed for 4- or 8-Ohm loads
2-stage high-efficiency switched mode power supply with high power-to-weight ratio
Ultra-quiet convection-cooled operation
On-board 80Hz HPF, selectable gain sensitivity
Up to 8 sec. of turn-on delay with selectable dip switch complement
Comprehensive amplifier protection circuitry includes: output over-current, DC output, main supply rail over-voltage, chassis temperature, inrush iimiting, mains fuse
Front panel indicators include overall power, standby, and protect, along with per-channel clip and signal indicators
Euro-block input connectors, screw terminal outputs
SPECIFICATIONS
:
Number of Channels 4
Power Rating 8 Ohms
4 x 80 W per Channel
4 x 300 W Bridged
4 Ohms:
4 x 150 W per Channel
Amplifier Class Class-D
Performance
Protections On/Off Muting
Frequency Response 20 Hz to 20 kHz ±1 dB
Damping Factor > 200 at 8 Ohms
Input Sensitivity +1 dBu or +4 dBu
Input Impedance 20 Kilohms (Balanced)
Max Gain 36 dB
SNR >103 dB
THD 8 Ohms:
< 0.5% (Full Range, at Rated Power -10 dB)
Signal Processing
Filters 2 x High-Pass:
80 Hz
Connectivity
I/O 4 x Euro block 3-Pin Input
4 x Screw Terminal Output
Power
Current Consumption 102 mA (Standby)
660 mA (Idle)
1.95 A (1/8 Power, Typical)
3.8 A (1/3 Power, Max)
Power Consumption 4 Ohms:
150 W (1/8 Power)
Physical
Display & Indicators 1 x Blue LED (Power)
1 x Yellow LED (Standby)
1 x Red LED (Protect)
4 x Red LED (Clip)
4 x Green LED (Signal)
Cooling Convection
Dimensions 19.0 x 1.8 x 11.0" / 483.0 x 45.5 x 279.4 mm
Weight 9.5 lb / 4.3 kg
Box Dimensions (LxWxH) 24.5 x 17.8 x 4.75"
MANUFACTURER
:
Ashly Audio Inc.
847 Holt Road
Webster, NY 14580-9103
WARRANTY OR SERVICE
:
I am an individual selling this equipment and not a retailer. I offer no warranty or service other than the equipment is in normal working condition.
SHIPPING
:
For this item, I will pick up the shipping within the USA only, your shipping fee will be {{detail_product_description}}.