Bryston Monaural PowerPac 60s with Performance Upgrade ONE PAIR ONLY

Description

The
Bryston PowerPac 60 Pro
amplifier, is a no-compromise, modular, single channel power amplifier delivering 60 watts at 8 Ohms, or 100 watts into 4 Ohms.
The Bryston PowerPac 60 monaural amplifier consist of two of Bryston’s custom power transistors as output devices. The power output is 60 Watts @ 8 Ohms. And 100 Watts @ 4 Ohms.
Dimensions PP60: (LHW) 12 X 1.8 X 7.1 Inches, 30.5 x 4.6 x 17.9 cm. Weight 5.7 Lbs/2.6Kg.
This unique upgraded pair are enhanced to heighten performance with sleeve, anchor-bolt mounted to
custom-made 3-inch thick oak hardwood isolation blocks
, optimizing audio performance of these classic amps. Note: the only defect besides some slight wear and tear is a corner wood gouge on the rear of one block as in photo - not visible when positioned correctly next to a speaker or on an audio shelf. At the foundation are 8 heavy-weighted, dense metal, height-adjustable cone feet made by UK company SuperCellAudio (TM) which include 8 protection caps for wooden-type floors. The fitted metal amp protection covers are rear-end ported for cables and give the amps a sleek overall outlook to be positioned out in the open adjacent its correspondent-driven speaker, minimizing speaker cable length which would otherwise denigrate the audio signal through lengthier cables on the amp-to-speaker signal path.
The Bryston PowerPac 60 monaural amplifier consist of two of Bryston’s custom power transistors as output devices. The power output is 60 Watts @ 8 Ohms. And 100 Watts @ 4 Ohms.
Dimensions PP60: (LHW) 12 X 1.8 X 7.1 Inches, 30.5 x 4.6 x 17.9 cm. Weight 5.7 Lbs/2.6Kg.
The PowerPac 60 is a modular monaural version of our very popular 2B-LP stereo amplifier but designed to be utilized in applications where portability, sound quality and flexibility are of prime importance.
The PowerPac 60 is a perfect choice for use as a portable power amplifier which also has the option of being attached directly to the rear of your loudspeaker.  This provides for the use of very short speaker leads resulting in a much improved loudspeaker/amplifier interface.
The PowerPac 60 can also be bolted on the wall for utilization in audio/video surround systemsleft/right/center/rears) where a non-conspicuous power module is required.  A further application would be in multi-room audio systems where single or multiple amplifiers are needed to provide music in adjacent rooms.