Classe Audio Power Amplifier - Stereo

Description

Threading the needle between the analog and digital worlds the Classe CA-D200 finds its unique home.
The CA-D200 is the first Class D amp from Classe.
The CA-D200 is rated at 200Wpc into 8 ohms (400Wpc into 4 ohms) and uses a proprietary-designed switch-mode power supply (SMPS) with power-factor correction (PFC) and switching amplifier stages.
Tonal consistency that is neither dark nor light providing uncluttered detail. Richly alive, viscerally, and dynamically charged.
-Two Channels
SPECIFICATIONS:
All tests un-weighted and 500kHz measurement bandwidth (except SNR).
Frequency response
10 Hz - 20 kHz, -1 dB into 4?
Output power
200W/Ch rms into 8? (14.5dBW)
400W/Ch rms into 4? (14.5dBW)
Harmonic Distortion
<0.018% @ 1kHz Balanced Input
Peak Output Voltage
113V peak to peak, 40V RMS no load
113V peak to peak, 40V RMS into 8?
Input Impedance
100k? Balanced / 50k? SE
Voltage gain
29 dB
Input level at clipping
1.4V rms Balanced/SE
Intermodulation
Distortion
>80 dB below fundamental
into 8? Balanced
Signal to Noise Ratio
-100 dB at peak output into 8?
Measured Bandwidth 20 kHz
Mains Voltage
90-264V, 50/60 Hz
Standby power
consumption
3W @ 120V; 4W @ 230V
Dimensions
Width 17.5” (445mm)(excluding connectors)
Depth 16.5” (419mm)
Height 4.78” (121mm)
Weight
28lb (12.7kg) Net
37lb (16.3kg) Gross