-40%
Crown XTI 6002 Power Amp
Crown XTI 6002 Power Amp
Crown XTI 6002 Power Amp

Crown XTI 6002 Power Amp

$ 765.6

Availability: 100 in stock
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Type: Power Amplifier
  • California Prop 65 Warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
  • Brand: Crown
  • Return shipping will be paid by: Seller
  • Number of Channels: 2
  • Item must be returned within: 60 Days
  • Condition: These items are briefly used products that Crutchfield customers have returned during our 60 day satisfaction guarantee period. Before being offered for resale, each item gets a thorough inspection by our returns-processing technicians. While all items are fully functioning, some items may have minor cosmetic damage such as small scratches or dents. Others may have damaged product packaging, or may be packaged in generic boxes. They may be missing non-essential accessories. In rare cases the included accessories may be replaced with generic equivalents. TVs or other products with screens do not have scratches or imperfections on the screen itself. The full manufacturer's warranty still applies. All items are covered by Crutchfield's 60-day satisfaction guarantee with free returns ability.
  • UPC: 871015005478
  • Model: XTI 6002
  • MPN: XTI6002
  • All returns accepted: Returns Accepted

    Description

    Product highlights
    General Information:
    2-channel power amplifier with built-in digital signal processing
    power output:
    1200 watts per channel at 8 ohms
    2100 watts per channel at 4 ohms
    3000 watts per channel at 2 ohms
    4200 watts (mono) at 8 ohms in bridged mode
    6000 watts (mono) at 4 ohms in bridged mode
    frequency response: 20-20,000 Hz (-1 dB)
    signal-to-noise ratio: 103 dB
    total harmonic distortion: 0.5% (20-20,000 Hz)
    Features:
    independent right- and left-channel level controls
    LCD screen with sel/prev/next buttons
    rear panel circuit breaker/reset switch
    digital signal processing:
    defeatable Peakx Plus Limiters for each channel
    input EQ: 6 parametric filters per channel
    high-pass and low-pass crossover filters
    output EQ: 8 parametric filters per channel
    50 ms of total delay
    SubHarmonic Synth
    proportional speed fan with front-to-rear airflow and three user-defined settings
    initial power, DC voltage, short circuit, thermal, overload, and current limiting protection
    front-panel LEDs indicate power, signal, -10dB and -20dB below clipping, ready, clipping, and temperature
    integrated cast aluminum handles
    Connections:
    inputs: balanced XLR
    outputs: binding posts and Neutrik Speakon
    XLR Link/Out outputs to send signal to another amp
    USB connection for HiQnet applications
    Other Information:
    weight: 24 lbs.
    19"W x 3-1/2"H x 16-1/4"D (2 rack spaces)
    warranty: 6 years (3 years if purchased before 1/1/20)
    What's in the box
    Power amp
    AC power cord
    Operation Manual
    About this item
    Written by Crutchfield's Dominic DeVito
    Power and protect your system
    Crown's XTi 2 Series power amplifiers don't just make your speakers sing — they serve as vital lynchpins for your sound system, allowing your music to reach the masses without compromise or overexertion. The Crown name on the front of these amps ensures you've got a trustworthy power source that's loaded with innovative features, like advanced limiters that give you full control, plus integrated signal processing tools for dialing in the perfect tone. When it's time to raise the hair on the back of the crowd's neck, a Crown XTi 2 amplifier does the heavy lifting for you.
    The rear of the XTi 6002 power amplifier offers XLR inputs, plus Speakon and binding post outputs, as well as loop-through XLR Link/Out output connectors.
    Crown's most powerful XTi 2 Series amp
    The Crown XTi 6002 amplifier revs up your system with 1200 watts per channel at 8 ohms, 2100 watts per channel at 4 ohms, and up to 6000 heavyweight watts in bridged mode. The proportional speed fan features three user-defined settings — normal, early, and full-speed — to help keep things cool within the front-to-rear airflow system. The universal tracking switch-mode power supply maintains efficiency and reliability. The rear panel features a built-in circuit breaker to protect against overload. Steel construction with a cast aluminum front panel helps keep this dynamo robust under repeated use.
    Up front the amp boasts independent level control knobs and LEDs, an on/off switch, LCD screen, and three menu control buttons. You'll be able to monitor the amp's presets and processing status through the LCD screen.
    The Crown XTi 6002 offers balanced XLR inputs, as well as binding posts and Neutrik Speakon® outputs for the speakers, plus XLR loop-thru connectors for connecting additional amps. Integrated cast aluminum rack handles promote smooth transport between the van and the gig, and these amps are eminently rackable and stackable.
    Push it to the limit
    Looking for a way to push your sound to the edge without going too far afield? Crown's Peakx Plus Limiter technology gives you total control over threshold, attack, and release times, so you can dial in your sound at the boundaries without worry about excess stress on your system. It's defeatable, just in case you want to work around it.
    Built-in processing
    The XTi 6002 gives you plenty of options for shaping your sound from the rack. It's got 6 parametric filters per channel for the input EQ, plus high- and low-pass crossovers. 8 parametric filters per channel on the output EQ give you further adjustments. You also get built-in delay and 30 total presets, 29 of which are user-defined.
    Crown's SubHarmonic Synth feature takes your low-frequency signal, then "synthesizes" a new signal with the same characteristics, just one octave lower. The XTi 6002 sums the two signals and sends the result to your subwoofer. You can adjust for frequency, gain, and filter type to get the most out of your low end.
    HiQnet for further adjustments
    You can connect the XTi 2 Series amp to your laptop using the amplifier's USB plug, providing access to optional HiQnet Band Manager or Audio Architect software which you can download. These software programs allow you to tweak your amp's and system settings right from your laptop, and save the settings for future gigs. They can also give you real world feedback on how different components can fit into your system down the road.