Custom Nobsound 100W TPA3116D2 Amp Board & Mean Well SPS & Base w Binding Posts

Description

This is a single channel (mono) full frequency Nobsound 100W TPA3116D2 amplifier board mounted to and powered by a Mean Well LRS-100-24 switching power supply (24VDC / 100W / 4.5A).  The enclosed power supply is in turn mounted to an empty iPhone 6 box that has been repurposed as a base which houses a pair of
standard
binding posts.  The posts are five way, however they are each covered in black heat shrink.  You may use a pair of standard banana plugs in order to feed a single channel to a speaker or you may remove the heat shrink in order to connect a pair bare wires, forked terminals, etc.
Additionally, you will receive a 3.5 mm Male TRS to Male RCA adapter which I used in order to connect my source to the input of the amp board.  Your scenario may be different and not require the use of this adapter, however it is included regardless.
Also included and pictured last is a three pronged power cable terminated with forks for a quick and easy connection to the Mean Well switching power supply.
The power cable and the two +/- DC twisted pairs are all sheathed in TechFlex terminated with with marine duty heat shrink tubing.
The amp's single channel output is wired to the binding posts mounted in the base with a short run of "Monster Cable XP HP High Performance Precision "Time Correct" Speaker Cable with Magnetic Flux Tube and LPE Dielectric".  Yes, you read that correctly, this speaker cable is not only Time Correct, but also has a Magnetic Flux Tube and is LPE Dielectric!   (Please note that the seller makes no warranties as to the marketing claims of Monster Cable.)
Please
don't
hesitate to ask any questions you may have!