Digital Bridge LCR Meter Resistance Impedance Inductance Tester USB, RS232

Description

Digital Bridge LCRMeter Resistance Impedance Inductance Tester USB, RS232
Features:
ET44 series desktop bridge uses 3.5in TFT display screen, 5-bit half display, clear interface display, easy to use.
You can use USB and RS232 for remote control, and you can use a handle to classify components.
It can not only adjust the output frequency and test level, but also record the value of components in the measurement process.
The internal bias voltage outputs 1mV-1500mV, with a basic accuracy of 0.2%.
The measurement frequency is as high as 100 kHz and the test level is 100-2000 mV. It supports the measurement of current, resistance and electrolytic capacitance.
It supports automatic identification of component measurement, is equipped with open circuit and short circuit correction, and provides a variety of test interfaces.
Supports SCPI communication protocol, provides system settings, can configure language, buzzer, screen brightness and so on according to user needs.
Configuration of manual and automatic range, with data recording function, can display the maximum, minimum and average value.
Specification:
Condition: 100% Brand New
Item Type: Bridge Meter
Material: Metal, Plastic
Plug: EU Plug 220V, US Plug 110V (Optional)
Model
ET4401
Digits
Main parameter: 5 digits; secondary parameter: 5 digits
Measurement Parameter
Main parameter: L/C/R/Z; secondary parameter: X/D/Q/ESR
Measurement Range(L)
0.01μH - 9999H
Measurement Range(C)
0.01pF - 99999μF
Measurement Range(R)
0.0001Ω - 99.99MΩ
Basic Accuracy
0.2%
Test Frequency (Hz)
10kHz
Measurement
Display Speed
2 times/second (slow), 4 times/second
(medium speed), 8 times/sec (fast)
Internal Bias
0-1500mV adjustable, 1mV stepping
Test Level
100Hz、120、200Hz、400Hz、800Hz、1kHz、2kHz、4kHz、8kHz、10kHz
Correction Function
Open circuit correction, short circuit correction
Screening function
The screening limit can be set from -50% to + 50%
with fixed points of 1%, 5%, 10% and 20%
Selection of comparator
Five gear sorting, third gear qualified, one gear failed, one ancillary gear
Communication Interface
Standard configuration: USB, RS232 (or 485)
Handle interface; Optional: GPIB, USB Host
Others
Support DCR, electrolytic capacitor measurement mode
adjustable backlight brightness, optional in English and Chinese
Package List:
1 x Digital Bridge Meter
1 x Set of Accessories
1 x Instruction Manual
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
Payment
We accept PayPal only.
We only ship item to your PayPal verified address.
Payment must be received within 3 days from the date of purchase.
Terms Of Sales
1. Our listing price includes the value of goods,packaging cost,and export
taxes,not including international importduties.
2. Importduties,taxes,and charges are not included in the item price or shipping fee.
3. The importduties are buyers' responsibility.Please check with your country's
customs office determine what these additional costs will be prior to your
purchase.
4. All disputes arising from the importduties will be submitted to eBay for solution.
Feedback
Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.
If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5stars" in very area.
Our aim is to provide TopLevel Customer Service, your recognition will encourage us greatly and serve you better.
We strive to keep all our customers satisfy.
Contact Us
We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
On Nov-28-20 at 22:24:07 PST, seller added the following information:
On Dec-31-20 at 02:51:10 PST, seller added the following information:
On Mar-09-21 at 03:01:10 PST, seller added the following information:
On Mar-23-21 at 03:50:11 PDT, seller added the following information: