LCR Meter 100KHz 16Points L/C/R/Z/X/D/Q/θ/ESR/DCR/Bias 3.5''TFTLCD ET4401/ET4410

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
LCR Meter 100KHz 16Points L/C/R/Z/X/D/Q/θ/ESR/DCR/Bias 3.5''TFTLCD ET4401/ET4410
Popular
Popular
Product Introduction
ET44 series（ET4401/ET4410）Desktop Bridge LCR
Product description：
ET44series LCR digital bridge is designed using automatic balance bridge principle component parameter analyzer, the tests of 100Hz ~ 100 kHZ bandwidth, 0.1% of the basic classification function provided by the accuracy of measurement and instrument for the vast majority of components and materials to provide accurate and complete the survey and analysis, is widely used in product research and development, components such as incoming inspection, product online applications.
Product features：
Measuring frequency up to 100 kHZ,
Test level 100mV ～ 2000 mV,
Support dc resistance (DCR), electrolytic capacitor measurement
The internal bias voltage output 0 mV ～ 1500 mV 3.5 inch TFT display, five shows
Communications: USB Device, RS232 , Handle,
Data record function (maximum, minimum, average)
Support SCPI communication protocol
Provide the system Settings, can according to need to configure the Chinese or English, buzzer, screen brightness, etc
Basic measurement accuracy of 0.1%
Manual and automatic range
With open circuit and short circuit calibration function
Comparator separation (5), alarm function
General technical specifications：
Power voltage: 220V.AC/50Hz ±10%,OR 110V.AC/50Hz ±10%
Power consumption: <10W
Display: 3.5” TFT LCD, resolution 480*320
Interfaces: standard: RS232, USB Device, Handler ;
Service environment: 0°C-40°C
Sizes: 265mm*105mm*305mm (L*W*H)
Weight: 2.1 kg
Main technical indicators：
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
LCR Meter 100KHz 16Points L/C/R/Z/X/D/Q/θ/ESR/DCR/Bias 3.5''TFTLCD ET4401/ET4410
Product Introduction
ET44 series（ET4401/ET4410）Desktop Bridge LCR
Product description：
ET44series LCR digital bridge is designed using automatic balance bridge principle component parameter analyzer, the tests of 100Hz ~ 100 kHZ bandwidth, 0.1% of the basic classification function provided by the accuracy of measurement and instrument for the vast majority of components and materials to provide accurate and complete the survey and analysis, is widely used in product research and development, components such as incoming inspection, product online applications.
Product features：
Measuring frequency up to 100 kHZ,
Test level 100mV ～ 2000 mV,
Support dc resistance (DCR), electrolytic capacitor measurement
The internal bias voltage output 0 mV ～ 1500 mV 3.5 inch TFT display, five shows
Communications: USB Device, RS232 , Handle,
Data record function (maximum, minimum, average)
Support SCPI communication protocol
Provide the system Settings, can according to need to configure the Chinese or English, buzzer, screen brightness, etc
Basic measurement accuracy of 0.1%
Manual and automatic range
With open circuit and short circuit calibration function
Comparator separation (5), alarm function
General technical specifications：
Power voltage: 220V.AC/50Hz ±10%,OR 110V.AC/50Hz ±10%
Power consumption: <10W
Display: 3.5” TFT LCD, resolution 480*320
Interfaces: standard: RS232, USB Device, Handler ;
Service environment: 0°C-40°C
Sizes: 265mm*105mm*305mm (L*W*H)
Weight: 2.1 kg
Main technical indicators：
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.