LQ-9101 Auto LCR Tester LCR Meter 10KHz Digital Bridge + Kelvin Clip+Test Lead##

Description

Description
LQ-9101 Auto LCR Tester LCR Meter 10KHz Digital Bridge + Kelvin Clip + Test Lead
Measurement Source:
- Frequency: 0Hz (DC) 100Hz 120Hz 1000Hz 10kHz; Error ± 100 ppm
- Voltage 0 Hz (DC): 0.56 V ± 5% AC AC RMS: 100 mV 300 mV 600 mV ± 5%
- Internal resistance AC DC Constant 100Ω ± 5%
Basic Accuracy:
- Z / R / L / C: ± reading × 0.2%
- Θ: 100 Hz 120 Hz 1 KHz & lt; 0.005 ° 10 KHz & lt; 0.05 °
Display Range:
- Four significant figures, decimal 0000--9999.
- Impedance / resistance: 0.1mΩ-999.9MΩ (the minimum resolution is only 0.1mΩ, 100mΩ the following three significant figures)
- Inductance / Capacitance: 0.000uH - 999.9KH 0.000P - 999.9mF
- Quality factor / loss factor: Q: 0.0000 --- 99999 D: 0.0000 --- 99999
- Impedance angle θ: -179.99 ° --- 0.0000 --- + 180.00 °
Display Parameters:
- Window 43 × 29 mm Effective display area 37 × 23 mm
- LCD128 × 64 automatic backlight
- The update frequency is 3.75Hz
Measurement Method:
- Automatic range control
Body clip clip socket: direct four-wire mode
External test line: external four-wire or two-wire mode
- Measurement results display and model
Resistance, inductance, capacitance, Q value, D value, phase angle
Ls (Cs) -Rs-Q model, Lp (Cp) -Rp-D model, Z-theta model
- Measurement Time
Since the measured components from the start, the main parameters of about 1 second secondary parameters ≥ 1 second
Power Supply and Charging:
- Built-in 3.7V / 450mAH rechargeable
- Single-button press the switch machine
- Under-voltage automatic shutdown 3.55V ± 0.05 V
- Charging power DC5V, Ф3.5mm inside and outside core plug, inside + outside -
- Charging time of about 1.5H - 2.0H cumulative use of time ≮ 8 hours
Power Consumption:
- Maximum operating current of 27mA (dark ambient backlight automatically adjust the brightest, non-test state)
- Basic operating current 23mA (bright environment backlight automatically adjusts the darkest, non-test state)
- Power off state consumption <1uA
Automatic Shutdown Time:
- 15 ± 2 minutes, automatic shutdown time to remind the pre-1 minute
- Short press the power switch to maintain power on, automatic shutdown timer to time. See the user manual for details
Size and Weight:
- 103 × 69 × 24 mm
- 180g
Package Included:
- 1 x Digital Bridge LCR Metetr Resistor Inductance Capacitance Tester
- 2 x Kelvin Clips
- 2 x Test Leads
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.