-40%

M328 DIY Transistor Tester LCR Diode Capacitance ESR Meter PWM Signal Generator

$ 8.37

Availability: 30 in stock
  • Refund will be given as: Money Back
  • Brand: Unbranded
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • MPN: Does Not Apply
  • All returns accepted: Returns Accepted
  • Country/Region of Manufacture: China
  • Condition: New
  • Restocking Fee: No

    Description

    M328 DIY Transistor Tester LCR Diode Capacitance ESR Meter PWM Signal Generator
    Multi-functional transistor tester for automatic detection of NPN and PNP transistors, FET, diodes, dual diode, thyristor, SCR, automatic identification of the transistor pinout. It also can be used as square signal and PWM signal generator.
    Features:
    Digital LCD display for easy readings, can display measured data and graphics.
    Rotary switch control, a key measurement for convenient use.
    Main chip is the DIP, easy for electronic enthusiasts to DIY or update the main chip.
    Use 9V battery(not included), can also use DC power(DC 6.8-12V).
    Automatic shutdown, shutdown current is only about 20nA.
    Automatically detects NPN and PNP transistors, FET, diodes, dual diode, thyristor, SCR, automatic identification of the transistor pinout.
    Test NPN and PNP transistor common-emitter current amplification factor, the base-emitter threshold voltage, off the collector - emitter leakage current.
    Support 2 resistors measurement, show its positive and negative, on-state voltage.
    Resistance measurement maximum resolution 0.01Ω, can be measured up to 50MΩ.
    Automatically test the pins of a component and show on the display.
    Measure FET gate threshold voltage and gate capacitance.
    For the following 2100Ω resistor while measuring its inductance measuring range from 0.01mH - 20H.
    Can be used as signal generator and frequency meter: frequency range from 1Hz-2MHz and can generate 1%-99% PWM(pulse width modulation) signals.
    Notice:
    Before measuring capacitance, the capacitor must be discharged, otherwise very likely damage the meter.
    Specifications:
    Display: 160x128 LCD
    Power Supply: 1 x 9V Battery(not included); DC 6.8-12V
    Current: Approx. 30mA
    Resistance Measurement: Max. 50MΩ
    Resistance Resolution: 0.01Ω
    Capacitance Measurement: 25pF~100mF
    Capacitance Resolution: 1pF
    DC Voltage Measurement: Up to 50V
    Screen Size: 3.7x 3cm / 1.45x1.18in
    PCB Size: 7.8 x 6.2cm / 3.1 x 2.44in
    Quantity: 1 Pc
    Note:
    Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
    Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
    Package Contents:
    1 x Transistor Tester
    English User Manual:
    https://www.dropbox.com/s/i58od389e3ip9hd/E1821%20User%27s%20Manual.docx?dl=0