MCINTOSH C41 PREAMPLIFIER / PERFECT CONDITION / NO RESERVE / SERIAL # RZ2159

Description

NO RESERVE / ORIGINAL OWNER
This is a gorgeous and completely analog preamp from McIntosh, back from the time before they started embedding DAC's and other noisy devices that quickly get outdated.
IT IS A full function preamp capable of connecting to a full sized system.
Plus this uses real potentiometers for volume and balance.
Complete set including remote, power cord, and manual.
PLEASE SEE PICTURES FROM MANUAL (ABOVE).
SPECIFICATIONS
Frequency Response
20Hz to 20kHz, +0 / -0.5dB
Rated Voltage Output
2.5Vrms (balanced and unbalanced)
Maximum Voltage Output
8Vrms
Output Impedance
250 ohms
Total Harmonic Distortion
0.002% maximum from 20Hz to 20KHz
Input Sensitivity
Phono: 2.5mV for rated output
(0.5mV IHF)
High level: 250mV for rated output
(50mV IHF)
Maximum Input Signal
Phono: 90mV
High level: 10V
A-Weighted Signal-to-Noise Ratio
Phono: 90dB below 10mV input
(84dB IHF)
High level: 103dB below rated output
(93dB IHF)
Input Impedance
Phono: 47k ohms, 65pf
High level: 22k ohms
Voltage Gain
Phono to tape: 40dB
Phono to main: 60dB
High level to tape: 0dB
High level to main: 20db
Tone Controls
Bass: ±12dB @ 20Hz
Treble: ±12dB @ 10kHz
Power Requirements
120V 50/60Hz, 20W
Dimensions (h x w x d)
inch: 5.44 x 17.5 x 17.5
cm: 13.8 x 44.5 x 44.5
includes clearance for connectors
Knob clearance: 0.75" (1.9 cm)
Weight
23 lbs. (10.5kg) net
40 lbs. (18.2kg) shipping
Extra-wide dynamic range
Ultra-low distortion
Silent electromagnetic switching
Precision-trimmed volume control
9 source selections including MM phono
Balanced input
Balanced main output
3 unbalanced outputs (Main, 1,2)
Independent listen and record selection
Dual processor loops
Control data output for source components
Remote power control (1 main, 1 accessory, 2 switched)
Power and mute indications shown on remote sensor
Accomodates more sources with McIntosh MVS3 A/V Selector
Exclusive McIntosh tone controls
Switchable loudness compensation
Auto muting during power up
Electronically regulated power supply
Double-shielded power transformer
Low-noise 1% metal film resistors
Gold plated input and output jacks
Modular construction with steel chassis
Glass front panel with illuminated nomenclature
Infrared remote control
Connector for external IR sensor
Headphone jack
Shipping weight: 40 lbs.
PLEASE NOTE: ESTIMATED SHIPPING CHARGE SHOWN IS TOTALLY INCORRECT AND IS NEITHER APPLICABLE NOR WILL IT BE HONORED WITH PURCHASE OF THIS ITEM. SHIPPING  WILL BE SIGNIFICANTLY HIGHER.
IF
SHIPPED, PACKING COST ALONG INSURANCE WILL BE ON YOUR NICKEL.
YOU ARE WELCOME TO PICK UP THIS PREAMP IN ZIP CODE 19010 (BRYN MAWR, PA, JUST OUTSIDE PHILADELPHIA), OR I CAN DELIVER IT WITHIN A CERTAIN RADIUS OF ZIP CODE 19010 FOR .50 PER MILE.