MK-328 TR\LCR\ESR Transistor LCR ESR Tester Cemiconductor Device Analyzer V1C4

Description

Use the latest M328 version software, more function than M8 version. The microcontroller adopts 8 MHz external crystals oscillator, better measurement accuracy. The related resistance of affecting the accuracy use 1%metal film resistor, and the rest also use 1% metal film resistor.Use backlight low-power consumption LCD screen, compared with the overall power consumption is almost negligible, convenient to read the data in the dark.Up to two Resistors are measured and shown values with up to four decimal digits in the right dimension. All symbols are surrounded by the probe numbers of the Tester. So Potentiometer can also be measured. If the Potentiometer is adjusted to one of its ends, the Tester cannot differ the middle pin and the end pin.Capacitors with ...
Have a nice Purchase!
MK-328 TR\LCR\ESR Transistor LCR ESR Tester Cemiconductor Device Analyzer V1C4
Use the latest M328 version software, more function than M8 version. The microcontroller adopts 8 MHz external crystals oscillator, better measurement accuracy. The related resistance of affecting the accuracy use 1%metal film resistor, and the rest also use 1% metal film resistor.
Use backlight low-power consumption LCD screen, compared with the overall power consumption is almost negligible, convenient to read the data in the dark.
Up to two Resistors are measured and shown values with up to four decimal digits in the right dimension. All symbols are surrounded by the probe numbers of the Tester. So Potentiometer can also be measured. If the Potentiometer is adjusted to one of its ends, the Tester cannot differ the middle pin and the end pin.
Capacitors with value below 30pF are usually not be detected, but can be measured together with a parallel diode or a parallel capacitor with at least 30pF. In this case you must subtract the capacity value of the parallel connected part.
Note: Before the measurement of capacitance, must to discharge the capacitor, otherwise may damage the instrument.
A key operation with automatic shutdown.
Battery operation is possible since shutdown current is only about 20nA. Please note the battery is not included.
Automatic detection of NPN and PNP bipolar transistors, N- and P-Channel MOSFETs, JFETs, diodes, double diodes, unidirectional thyristor and bidirectional thyristor.
Automatic detection of pin layout of the detected part.
Measuring the current amplification coefficient of the bipolar transistor and the voltage of base - emitter threshold.
Darlington transistors can be Identify by the threshold voltage of the high current amplification factor.
Detection the bipolar transistor and the protection diode of MOS
Measuring the Gate threshold voltage and Gate capacity value of MOSFETs.
The resolution of the resistance measurement is 0.1Ohm, can measure up to 50MOhm
Item Specifics
Brand
Unbranded
MPN
Does not apply
UPC
191466501320
EAN
191466501320
ISBN
191466501320
Designer/Brand
Unbranded
Payment
1. We only accept payment via PayPal, other payment is not acceptable.
2. Please make sure your shipping address is the same of your PayPal address before you pay. We will not be responsible for such a case if you change you shipping address as we have shipped your items out.
Shipping
1.
We ship to Worldwise,e
xcluded
some far away places. .
2. We only ship to confirmed PAYPAL address; your PAYPAL address must match your Shipping address.
3. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Shipping fee has including the local handing and packaging fee.
4. All the items will be shipping within 1-2 working days after receiving the payment, except some holidays.
5. We will not be responsible for any custom delay or tax, because transit time is highly depended and provided by postal Service.
Returns
1.If you have not satisfied as you received the item, please return it within 30 days for a replacement or money back. Please contact me before you return it.
2.All  returned items must be in the original packaging with all  components  and  accessories included, and you must provide us the return  shipping  information  (The shipment or the tracking number)
3.Return  shipping fee is to be paid by the buyers. We will not be   responsible for any  custom duty or import tax.
Warranty
1.
One Year Manufacturer's Warranty
for defective items   (excluding items damaged and/or misused after receipt).
2.Defective items must be reported and returned to us within the warranty   period (and in the original packaging, if possible). You must tell us what the   defect is and give us your eBay ID. We do not repair or replace items with an   expired warranty.
Feedback
Have a nice Purchase!
Welcome to our Store!
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
HK UK Selling
Cell Phones & Accessories
Computer Accessories
Charger
Electronic Accessories
US Hot Selling
US Fixed Selling
Software
Consumer Electronics
Camera & Photos
Automotive Parts & Accessories
Baby
Beauty
Clothing & Accessories
DIY & Tools
Garden & Outdoors
Health & Personal Care
Home & Kitchen
Lighting
Luggage & Bags
Office Products
Outdoors
Pet Supplies
Jewellery
Tools & Building Supplies
Toys & Games
Arts, Crafts & Sewing
Watches
Books, Music, Video, DVD
Appliances
Musical Instruments
Industrial & Scientific
3D Printable Designs
HK Hot Selling Items
Other
MK-328 TR\LCR\ESR Transistor LCR ESR Tester Cemiconductor Device Analyzer V1C4
Use the latest M328 version software, more function than M8 version. The microcontroller adopts 8 MHz external crystals oscillator, better measurement accuracy. The related resistance of affecting the accuracy use 1%metal film resistor, and the rest also use 1% metal film resistor.
Use backlight low-power consumption LCD screen, compared with the overall power consumption is almost negligible, convenient to read the data in the dark.
Up to two Resistors are measured and shown values with up to four decimal digits in the right dimension. All symbols are surrounded by the probe numbers of the Tester. So Potentiometer can also be measured. If the Potentiometer is adjusted to one of its ends, the Tester cannot differ the middle pin and the end pin.
Capacitors with value below 30pF are usually not be detected, but can be measured together with a parallel diode or a parallel capacitor with at least 30pF. In this case you must subtract the capacity value of the parallel connected part.
Note: Before the measurement of capacitance, must to discharge the capacitor, otherwise may damage the instrument.
A key operation with automatic shutdown.
Battery operation is possible since shutdown current is only about 20nA. Please note the battery is not included.
Automatic detection of NPN and PNP bipolar transistors, N- and P-Channel MOSFETs, JFETs, diodes, double diodes, unidirectional thyristor and bidirectional thyristor.
Automatic detection of pin layout of the detected part.
Measuring the current amplification coefficient of the bipolar transistor and the voltage of base - emitter threshold.
Darlington transistors can be Identify by the threshold voltage of the high current amplification factor.
Detection the bipolar transistor and the protection diode of MOS
Measuring the Gate threshold voltage and Gate capacity value of MOSFETs.
The resolution of the resistance measurement is 0.1Ohm, can measure up to 50MOhm
Payment
1. We only accept payment via PayPal, other payment is not acceptable.
2. Please make sure your shipping address is the same of your PayPal address before you pay. We will not be responsible for such a case if you change you shipping address as we have shipped your items out.
Shipping
1.
We ship to Worldwise,e
xcluded
some far away places. .
2. We only ship to confirmed PAYPAL address; your PAYPAL address must match your Shipping address.
3. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Shipping fee has including the local handing and packaging fee.
4. All the items will be shipping within 1-2 working days after receiving the payment, except some holidays.
5. We will not be responsible for any custom delay or tax, because transit time is highly depended and provided by postal Service.
Returns
1.If you have not satisfied as you received the item, please return it within 30 days for a replacement or money back. Please contact me before you return it.
2.All  returned items must be in the original packaging with all  components  and  accessories included, and you must provide us the return  shipping  information  (The shipment or the tracking number)
3.Return  shipping fee is to be paid by the buyers. We will not be   responsible for any  custom duty or import tax.
Warranty
1.
One Year Manufacturer's Warranty
for defective items   (excluding items damaged and/or misused after receipt).
2.Defective items must be reported and returned to us within the warranty   period (and in the original packaging, if possible). You must tell us what the   defect is and give us your eBay ID. We do not repair or replace items with an   expired warranty.
Feedback
Copyright of XXXXX. All right reserved.
Powered by SoldEazy