NEW SANIFLO SANIGRIND PRO GRINDING PUMP, 014, AUTHORIZED DISTRIBUTOR

Description

SANIFLO SANIGRIND PRO GRINDING PUMP
The SanifloStore brings you another absolute beast of a pump, the SANIGRIND PRO is a heavy duty grinding pump designed for use with a traditional gravity toilet (bottom discharge).  The pump will accommodate a full bathroom and with its heavy duty stainless grinding blades can handle the rigors of the harshest conditions.
Listing is for the following:
Part # 014, Saniflo Sangrind Pro Grinder Pump
Condition:  New Factory Sealed
Warranty:  Factory 3 Year
Shipping:  Free
In stock, ships from our facility in southern NH. Tax Free!
Contact us with any questions you may have.
______________________________________________________________________________________
Description
The Sanigrind Pro is a system that is used to install a complete bathroom up to 25 feet below the sewer line, or even up to 150 feet away from a soil stack.  The Sanigrind Pro can handle the effluent from a toilet, sink, bathtub, shower and washing machine (indirect connection).
While most of our pump range consists of shredders/macerators, the Sanigrind Pro incorporates an actual grinder system.  The Sanigrind Pro is ideal for situations where you do not control the use of it (ie. rental unit, offices, warehouses, etc).  It is designed to deal with sanitary napkins that may have been flushed down the toilet; such may consist of condoms, sanitary napkins, q-tips, dental floss, etc.
Note:
In commercial installations, plumbing codes require an elongated bowl (ADA) to be installed with this system.
The inside of the Sanigrind Pro comprises of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel cutting blade and the pump.  When the flush is activated, the water flowing into the Sanigrind Pro activates a micro switch in the pressure chamber, which in turn starts the motor.  The motor is sealed for life in an oil filled enclosure.  A common spindle/shaft drives the impeller and the blades. The moving parts therefore are kept to an absolute minimum.  Water and organic waste matter, enter the chamber and are reduced to slurry as the blades rotate at 3600 RPM.  The reduced solids are picked up at the bottom and the impeller mounted beneath the motor ejects the waste.  The unit pumps the effluent upward to 25 feet and/or 150 feet horizontally (with gravity fall).  Once the water level in the container goes down, the micro switch deactivates.  The operating cycle for the Sanigrind Pro varies depending upon the discharge pipe run configuration.
In addition, the Sanigrind Pro will also discharge gray water from a variety of other sanitary fixtures such as: a sink, a bathtub/shower, a urinal and even a washing machine (indirect connection).  When adding a bathtub/shower, there should be a height difference between the bottom side inlet of the pump and the base of the bathtub or shower.  This height difference should be of 6” (minimum) or 8” (recommended), to allow for the installation of a P-trap and the required 1/4” per foot gravity flow towards the pump unit.
The wastewater from other sanitary fixtures is discharged into the Sanigrind Pro via two 2-inch inlets, on either side of the housing.  The discharge elbow on top of the Sanigrind Pro can be rotated 360 degrees depending on the discharge installation.  A non-return valve (included in assembly) prevents back flow into the unit.
This unit has been designed with a vent connection on the lid.  All plumbing codes require connection to a vent system.  Please note that the vent system should be a two-way air vent.  The use of mechanical vents, air admittance valves or similar devices are not permitted as these are considered one-way air vent systems.  It is highly recommended for the system to be connected to a Ground Fault Interrupter (GFI) circuit.
Periodic maintenance can be accomplished easily without having to disconnect the unit from either the toilet or the rest of the plumbing system.  Through a service panel, a service contractor can easily access the electrical components as well as the level sensor mechanism of the pump.
The Sanigrind Pro unit must be connected to a standard toilet with a bottom outlet.  The maximum distance from a toilet should be no more than 36 inches.
The Sanigrind Pro has been certified to American and Canadian Standards. Macerating standard; US: CSA Certified & IAPMO (UPC) listed - ASME A112.3.4, CA: Macerating Standard CSA B45.9.
The Sanigrind Pro (014) is ordered as a single unit only.  No toilet, cabinets, shower nor bathtub are included.
___________________________________________________________________
We Know Saniflo!
____________________________________________________
If you have any questions about the installation, fee free to contact us at the SanifloStore.
You are welcome to come to our warehouse to pick up your system if you are in the Southern NH area.
**Free Shipping Applies to the Lower 48 Only**
______________________________________________
_______________________________
Shipping
Items are usually shipped the same day if the payment is made by 3pm EST
We ship via Fed Ex Ground. Tracking information is always sent to your email address. Please check any spam filters as it may end up there.
If you need a package overnighted or expedited let us know. Please notify us prior to payment so we can invoice you for the additional charges.
International buyers are responsible for all tariffs, duties, taxes, fees and Vats. Customs forms will be completed in accordance with US law.
We can only ship to confirmed Paypal addresses.
If paying by Paypal, please do not send payment until your Paypal address is confirmed.
You are more than welcome to save on shipping and pick your items up at our facility during business hours M-F 9-4. Please contact us for directions.
We will combine shipping for multiple purchases.
Large ticket items will ship with signature confirmation required.
Sales Policy
Items are described to the best of our ability, if you have a question about an item please does not hesitate to ask.
If you have a specific question on the use and or installation of an item, please refer to the manufacturer's website.
If you have zero feedback, please contact us before bidding on or buying an item.
Please know exactly what you are buying. On every listing we will include the manufacturer's part number. Please do whatever research you need to on the respective parts before purchasing.
Please do not purchase something unless you intend on paying for it.
Please read all the policies, conditions, additional terms of sale, etc. prior to bidding/buying.
If an item is posted for an auction please do not ask for a Buy It Now price.
Please contact us in advance with any questions.
Payment policy
Payment is expected within 5 days of auction's close or Buy It Now.
Paypal is our preferred payment method.
Credit Cards are accepted and must be called in to our office between 10am - 4pm EST, Monday - Friday
Cash for pick ups at our location is OK, but please have exact cash on hand.
Return policy
If an item is received by you as not working, damaged from transit, not as described, etc. please contact us immediately.
Returned items must be approved and must accompany the Return Authorization Number (RMA#) we provide.
If an item is defective a replacement will be shipped when the defective item is received back to us.
If a replacement is not available, a refund will be granted when the defective item is received back to us.
Products may be returned within 30 days and will be subject to a 15% restocking fee plus any shipping costs incurred when we originally shipped the item.  All returns must be pre-authorized and must include the authorization # provided. Any item being returned for a refund must be in new condition complete with all parts and manuals.  Any shipping costs related to the return of the product are the responsibility of the customer.  Items damaged in return transit are the responsibility of the customer and will not be refunded.   Returns will not be accepted after 30 days.