OSD Stereo Amplifier 250Wx 2, 4Ohm Stable, Dual Source, Remote Control, XMP500

Description

OSD Audio XMP500 250Watt x 2 Class D Stereo Amplifier w/DSP Control
100% Original
Best Prices
Fast Shipping
Our XMP500DSP
is a powerful 2-channel Class D stereo amplifier that delivers stable power to speakers used in home theaters, media/gaming rooms and other listening environments. Pleasantly affordable and packed with features, this Class D amp cleans up sound quality, improves bass response and includes Digital Signal Processing for superior control of audio accuracy. The XMP500DSP includes other key features such as priority input switching that lets you connect a portable device or other source equipment and when the local source is active, its signal will take priority. No more trying to figure out what source is playing and what input to activate. Front-mounted A/B switches let you add audio to two zones that can be engaged separately or used at once by simply pushing both buttons. The XMP500DSP is bridgeable for commercial applications and includes 12V in/out trigger that allows the XMP500DSP to be powered on by other electronics or to power on other electronics via a 3.5mm mini phone plug cable. The front panel includes a programming navigation control knob to scroll through the display menus and change the settings of the DSP controller for pin-point audio accuracy.
Features
A slim but powerful 250 Watt per channel Class D amplifier
Class D technology for low distortion and high efficiency
Digital Sound Processing for highly accurate audio output
Main/interrupt priority input switching
Includes A/B switching for control over two zones
Front panel programming navigation control
Includes a 12V trigger for remote turn on
Signal sensing “power on” and trigger mode
Rack-mount ears included
Remote control included
Specs
Amplifier Type: Stereo
Amplifier Class: Digital Class D
Channels: 2; Speaker A, B or A&B Output
Power Handling: 125W(RMS)/ 250W(MAX) Per Channel @ 8 Ohm
Power Handling: 175W(RMS)/ 350W(MAX) Per Channel @ 4 Ohm
Bridged Rating (Watts): 700W @ 8 Ohm
Frequency Response: 10Hz-30kHz, -2dB/ +1dB
Impedance: 8 Ohm and 4 Ohm Stable
Channel Seperation: 65dB @ 1kHz, referred to 250W output into 8 ohms
Signal to Noise Ratio: 100 dB Below 150W Output into 8 Ohms w/ 20kHz
12V Trigger Mode
Inputs: Dual Source w/ Priority
Automatic Priority Dual Source Switching (Labeled Main & Interrupt)
Output: Main Line Pass Thru
Rack Mountable: Yes, Mounts Included
Remote Control: Yes
Dimensions (L x H x D): 17.5" x 2" x 12.5"
Weight: 10 lbs
Payment
Shipping
Returns
Payment
Shipping
Returns
We accept payment by any of the following methods:
PayPal, G Pay, Credit Card
Please pay as soon as possible after winning an auction, as that will allow us to ship your item to you sooner! Most orders placed before 2PM ships same day (M-F).
We offer
FREE shipping
on all orders!
Your order will be shipped within 1 business day of receiving payment (Monday-Friday).
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
100% Original
Best Prices
Fast Shipping
Our XMP500DSP is a powerful 2-channel Class D stereo amplifier that delivers stable power to speakers used in home theaters, media/gaming rooms and other listening environments. Pleasantly affordable and packed with features, this Class D amp cleans up sound quality, improves bass response and includes Digital Signal Processing for superior control of audio accuracy. The XMP500DSP includes other key features such as priority input switching that lets you connect a portable device or other source equipment and when the local source is active, its signal will take priority. No more trying to figure out what source is playing and what input to activate. Front-mounted A/B switches let you add audio to two zones that can be engaged separately or used at once by simply pushing both buttons. The XMP500DSP is bridgeable for commercial applications and includes 12V in/out trigger that allows the XMP500DSP to be powered on by other electronics or to power on other electronics via a 3.5mm mini phone plug cable. The front panel includes a programming navigation control knob to scroll through the display menus and change the settings of the DSP controller for pin-point audio accuracy. Features ---A slim but powerful 250 Watt per channel Class D amplifier ---Class D technology for low distortion and high efficiency ---Digital Sound Processing for highly accurate audio output ---Main/interrupt priority input switching ---Includes A/B switching for control over two zones ---Front panel programming navigation control ---Includes a 12V trigger for remote turn on ---Signal sensing “power on” and trigger mode ---Rack-mount ears included ---Remote control included Specs ---Amplifier Type: Stereo ---Amplifier Class: Digital Class D ---Channels: 2; Speaker A, B or A&B Output ---Power Handling: 125W(RMS)/ 250W(MAX) Per Channel @ 8 Ohm ---Power Handling: 175W(RMS)/ 350W(MAX) Per Channel @ 4 Ohm ---Bridged Rating (Watts): 700W @ 8 Ohm ---Frequency Response: 10Hz-30kHz, -2dB/ +1dB ---Impedance: 8 Ohm and 4 Ohm Stable ---Channel Seperation: 65dB @ 1kHz, referred to 250W output into 8 ohms ---Signal to Noise Ratio: 100 dB Below 150W Output into 8 Ohms w/ 20kHz ---12V Trigger Mode ---Inputs: Dual Source w/ Priority ---Automatic Priority Dual Source Switching (Labeled Main & Interrupt) ---Output: Main Line Pass Thru ---Rack Mountable: Yes, Mounts Included ---Remote Control: Yes ---Dimensions (L x H x D): 17.5" x 2" x 12.5" ---Weight: 10 lbs
100% Original
Fast Shipping
Best Prices
OSD Audio XMP500 250Watt x 2 Class D Stereo Amplifier w/DSP Control
Our XMP500DSP
is a powerful 2-channel Class D stereo amplifier that delivers stable power to speakers used in home theaters, media/gaming rooms and other listening environments. Pleasantly affordable and packed with features, this Class D amp cleans up sound quality, improves bass response and includes Digital Signal Processing for superior control of audio accuracy. The XMP500DSP includes other key features such as priority input switching that lets you connect a portable device or other source equipment and when the local source is active, its signal will take priority. No more trying to figure out what source is playing and what input to activate. Front-mounted A/B switches let you add audio to two zones that can be engaged separately or used at once by simply pushing both buttons. The XMP500DSP is bridgeable for commercial applications and includes 12V in/out trigger that allows the XMP500DSP to be powered on by other electronics or to power on other electronics via a 3.5mm mini phone plug cable. The front panel includes a programming navigation control knob to scroll through the display menus and change the settings of the DSP controller for pin-point audio accuracy.
Features
A slim but powerful 250 Watt per channel Class D amplifier
Class D technology for low distortion and high efficiency
Digital Sound Processing for highly accurate audio output
Main/interrupt priority input switching
Includes A/B switching for control over two zones
Front panel programming navigation control
Includes a 12V trigger for remote turn on
Signal sensing “power on” and trigger mode
Rack-mount ears included
Remote control included
Specs
Amplifier Type: Stereo
Amplifier Class: Digital Class D
Channels: 2; Speaker A, B or A&B Output
Power Handling: 125W(RMS)/ 250W(MAX) Per Channel @ 8 Ohm
Power Handling: 175W(RMS)/ 350W(MAX) Per Channel @ 4 Ohm
Bridged Rating (Watts): 700W @ 8 Ohm
Frequency Response: 10Hz-30kHz, -2dB/ +1dB
Impedance: 8 Ohm and 4 Ohm Stable
Channel Seperation: 65dB @ 1kHz, referred to 250W output into 8 ohms
Signal to Noise Ratio: 100 dB Below 150W Output into 8 Ohms w/ 20kHz
12V Trigger Mode
Inputs: Dual Source w/ Priority
Automatic Priority Dual Source Switching (Labeled Main & Interrupt)
Output: Main Line Pass Thru
Rack Mountable: Yes, Mounts Included
Remote Control: Yes
Dimensions (L x H x D): 17.5" x 2" x 12.5"
Weight: 10 lbs
Payment
We accept payment by any of the following methods:
PayPal, G Pay, Credit Card
Please pay as soon as possible after winning an auction, as that will allow us to ship your item to you sooner! Most orders placed before 2PM ships same day (M-F).
Shipping
We offer
FREE shipping
on all orders!
Your order will be shipped within 1 business day of receiving payment (Monday-Friday).
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
100% Original
Fast Shipping
Best Prices
Our XMP500DSP
is a powerful 2-channel Class D stereo amplifier that delivers stable power to speakers used in home theaters, media/gaming rooms and other listening environments. Pleasantly affordable and packed with features, this Class D amp cleans up sound quality, improves bass response and includes Digital Signal Processing for superior control of audio accuracy. The XMP500DSP includes other key features such as priority input switching that lets you connect a portable device or other source equipment and when the local source is active, its signal will take priority. No more trying to figure out what source is playing and what input to activate. Front-mounted A/B switches let you add audio to two zones that can be engaged separately or used at once by simply pushing both buttons. The XMP500DSP is bridgeable for commercial applications and includes 12V in/out trigger that allows the XMP500DSP to be powered on by other electronics or to power on other electronics via a 3.5mm mini phone plug cable. The front panel includes a programming navigation control knob to scroll through the display menus and change the settings of the DSP controller for pin-point audio accuracy.
Features
A slim but powerful 250 Watt per channel Class D amplifier
Class D technology for low distortion and high efficiency
Digital Sound Processing for highly accurate audio output
Main/interrupt priority input switching
Includes A/B switching for control over two zones
Front panel programming navigation control
Includes a 12V trigger for remote turn on
Signal sensing “power on” and trigger mode
Rack-mount ears included
Remote control included
Specs
Amplifier Type: Stereo
Amplifier Class: Digital Class D
Channels: 2; Speaker A, B or A&B Output
Power Handling: 125W(RMS)/ 250W(MAX) Per Channel @ 8 Ohm
Power Handling: 175W(RMS)/ 350W(MAX) Per Channel @ 4 Ohm
Bridged Rating (Watts): 700W @ 8 Ohm
Frequency Response: 10Hz-30kHz, -2dB/ +1dB
Impedance: 8 Ohm and 4 Ohm Stable
Channel Seperation: 65dB @ 1kHz, referred to 250W output into 8 ohms
Signal to Noise Ratio: 100 dB Below 150W Output into 8 Ohms w/ 20kHz
12V Trigger Mode
Inputs: Dual Source w/ Priority
Automatic Priority Dual Source Switching (Labeled Main & Interrupt)
Output: Main Line Pass Thru
Rack Mountable: Yes, Mounts Included
Remote Control: Yes
Dimensions (L x H x D): 17.5" x 2" x 12.5"
Weight: 10 lbs