Outdoor Tank Alarm (High Water Alarm) with 15 foot Mechanical Float

Description

The SP-4000 alarm system is designed to monitor liquid levels in sump basins, holding tanks, lift stations tanks and many other non-potable water and wastewater applications. Comes individually boxed with a cable tie and Instruction sheet.
This alarm comes in a Type 4X non-metallic enclosure with external mounting feet and a gasket on the door for outdoor use. It has a large red illuminating beacon, piezo, with Test and Silence toggle switch.
The SP-4000 is designed to sound an audible piezo horn and illuminate the red beacon light to notify of an alarm situation. There is a silence switch to turn the piezo horn off while fixing the alarm (the red alarm light will remain on until the alarm conditions are remedied).
Features
Alarm test and horn silence toggle with auto reset
Complete alarm includes a (Mechanical) float switch with mounting strap and a 15-foot cord.
NF2OW1500 Float Switch
Specifications
Voltage:
Primary: 120 VAC, 60 Hz
Enclosure
Type 4X non-metallic enclosure rated for indoor or outdoor use 8" X 4 1/2" X 4 1/4" (NEMA 3R)
Alarm horn
85 Decibels at 10 feet
Power Cord
6 feet 120 VAC (NEMA 5-15P)
Features:
Red "Alarm On" Beacon
Alarm test and horn silence button with auto reset
Float Information:
Operation:
Normally Open (Pump Down)
Cord:
15' Flexible 16 Gauge 2 Conductor SJOOW (UL & CSA) CPE (Chlorinated Polyethylene) Jacketed
Ratings:
10 AMP @ 120/240 VAC
1/4 H.P. @ 120/240 VAC
34.8 LRA
Operating Angle:
Narrow-Angle
Contacts close @ 25° above horizontal
Contacts open @ 10° below horizontal
Housing:
2.625" Dia x 4.625"
Float Material:
A.B.S. (Acrylonitrile Butadiene Styrene)
Operating Temperature:
Up to 82ºC / 180ºF
Pump Range:
7" to 28" adjustable based upon the length of cable beyond clamp/tether
Float Switch:
Mechanical (Contains no mercury) UL 508 listed
Warranty:
1 Year