PIONEER SA-1000 Integrated Amp in GREAT SHAPE

Description

I am sorry to let this go, but I have several brands and models of amps, pre amps, receivers and integrated amps and I am downsizing. This is one of the best examples of a PIONEER SA-1000 you will see listed.
Back in 1971 I was graduating from high school and getting ready for college and I shopped the many hi-fi stores our area had and made my best deal on this unit. It was considered the heart of an expandable high end system. It sounds very sweet and will be missed. Pioneer Model SA-1000 integrated amplifier in immaculate condition. Rated at 57 watts RMS into 8 ohms and 82 watts RMS into 4 ohms. Built like a tank and loaded with features. This unit makes use of the PIONEER speaker connector plugs. These are often seen sold by themselves for MANY dollars, BUT this unit comes with sets for “A” system spkrs and “B” system spkrs (see photos). It is now time to pass it along. A printed COPY of the owner’s manual will be included.
Please view all photos carefully as they are part of this item's description, and please ask any questions about this item that may not be mentioned in the description about its function, appearance, and condition. I have had the unit serviced by a qualified service tech to make sure functions operate.
It was in service until I pulled for this sale.
I have checked all operations before putting unit for sale. All items are cleaned, packaged and shipped with care usually within 2 business day of payment and it is intended to be shipped via FedEx. The cost shown for shipping and handling only covers a PART of the actual shipping costs of double boxing the unit.
I am not a stereo equipment dealer. I am selling this unit as is, as described and is sold without refunds for any reason nor warranty, implied or otherwise.
Here are the raw numbers for the unit when new:
Power output: 47 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 60kHz
Total harmonic distortion: 0.3%
Damping factor: 65
Input sensitivity: 2.2mV (mic), 0.15mV (MC), 2.9mV (MM), 58mV (ceramic), 200mV (line)
Signal to noise ratio: 80dB (MM), 100dB (line)
Channel separation: 50dB (MM), 55dB (line)
Output: 200mV (line), 30mV (DIN), 3V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 2 x FET, 39 x transistors, 18 x diodes
Dimensions: 430 x 145 x 337mm
Weight: 12.8kg
Year: 1971
FEATURES:
Controls:
Bass -8/+12 dB
Bass -8/+12 dB
Treble -12/+8 dB
Treble -12/+8 dB
Balance
Volume
Switches:
Speakers: Power Off, A, Spkr Off, B, A+B
Selector: Mic, Phono 1, Phono 2, Tuner, Aux 1, Aux 2
Muting: -20dB
Low Filter: 30Hz, Off, 60Hz
High Filter: 12kHz, Off, 6kHz
Phono 2: MM/MC
Loudness
Tape Monitor: 1, Off, 2
Tape Duplicate
Mode: Stereo Rev, Norm, L+R, L, R
Jacks:
Headphones
Mic Left
Mic Right
Indicators:
Power
Rear Panel:
AC Outlet Unswitched (2)
AC Outlet Switched
Power In (L, R)
Pre Out (L, R)
Pre/Power Mode: Connected/Separated
Tape Monitor 1 Out (L, R)
Tape Monitor 1 In (L, R)
Tape Monitor 2 Out (L, R)
Tape Monitor 2 In (L, R)
Tape Monitor 1 DIN
Aux 1 Input (L, R)
Aux 2 Input (L, R)
Phono 1 Mag Input (L, R).
Phono 1 Ceramic Input (L, R)
Phono 2 Input (L, R)
Phono 2 Impedance: 100kOhm, 50kOhm, 20kOhm
Center Channel Out
Speakers A (L, R)
Speakers B (L, R)
Voltage Selector
MC Phono Transformer Socket
THE PIONEER SA-1000 UNIT IS THE ONLY UNIT FROM THE MAIN PICTURE BEING OFFERED IN THIS AUCTION.