-40%

Portable Electric Drill Pump Self Priming Transfer Pumps Oil Fluid Water Pump

$ 4.79

Availability: 14 in stock
  • Restocking Fee: No
  • MPN: Does Not Apply
  • Numéro de pièce fabricant: Non applicable
  • Refund will be given as: Money Back
  • All returns accepted: Returns Accepted
  • UPC: Does not apply
  • EAN: Does not apply
  • Brand: Unbranded
  • Item must be returned within: 30 Days
  • Condition: New
  • Marque: - Sans marque/Générique -
  • Return shipping will be paid by: Buyer

    Description

    Description:
    Material: Engineering plastics
    Pump shank: 8mm Round Shank
    Transmission medium: Oil/Water pump
    Self-priming: 9ft
    Impeller structure: Rubber Impeller
    Fitment: For Electric Drill
    Working Temperture: 5-49℃(41-120℉)
    Weight: 251g
    Size: As picture shown
    Features:
    This self priming drill pump is designed to work with a corded or cordless drill,fits most electric drills.
    Converts virtually any drill into a high capacity pump capable of emptying sinks,aquariums,pool skimmers and much more.
    Small size, light weight and portable,convenient installation.
    This electric drill powered pump is suitable for home, garden and outdoor.
    Ideal for transferring light liquids, such as fresh water, sea water, oil, dilute organic solvents, insecticides and liquid fertilisers.
    Engineering plastic body and stainless steel internal parts avoid corrosion.
    Self-priming up to 9ft(2.75m) and pumps water out to maximum distance of 45ft(13.7m).
    Pumps up to 300 U.S GPH(1136L/hr).
    Pump connects to 1/2inch(1.3cm) diameter tubing.
    Operation instruction :
    1. To ensure optimum priming and long life, apply a few drops of lubricating oil in pump inlet prior to each use and flush with clean water after each use.
    2. Be sure inlet hose is airtight and as short as possible. Inlet hose should not exceed 9ft (2.75M).
    3. When pumping abrasive fluids or liquids with solids, longer pump life will be obtained by using a strainer on the inlet line.
    4. It is recommended that the pump is mounted to a surface for security and ease of use.
    5. Mount and start drill. Watch inlet tubing to be certain fluid is drawn into pump in15-20 seconds. If not, check that inlet tube is properly mounted to inlet.
    6. Do not run dry. If pump fails to prime, check to be sure that hoses are not Kinked or clogged. Pump depends on fluid being pumped for lubrication.
    Package Includes:
    1 x Drill pump
    2 x Hose clamps
    2 x Connectors
    NOTE:
    1. DO NOT run pump in reverse.
    2. Please allow 1-3mm error due to manual measurement, make sure that you do not mind before you bid.
    3. Due to the different monitor and light effect, the actual color may be slightly different from the picture color.
    On Jan-07-21 at 09:20:55 PST, seller added the following information: